Seattle City Light Conservation | Built Smart Users Manual

Site Superintendent Alert

Built Smart Users Manual | Specifications | Alerts | Water

This is a Seattle City Light BUILT SMART project and the following requirements must be met when constructing a BUILT SMART building in the Seattle City Light service area.

For a detailed explanation of program requirements, refer to the BUILT SMART Technical Specifications, Section 1.7, provided to the General Contractor.

Please contact the BUILT SMART field inspector at the following times:

Prior to concrete pour if you have on-grade slab (to check insulation)
When framing begins
When windows are delivered to site
During electrical rough-in (to check fans and exhaust ducting)
When caulking and sealing for air infiltration
Prior to covering exterior shear wall and tub area insulation
Exterior wall insulation
Ceiling insulation
When floor insulation is being installed (including under PT slab & above commercial space)
When water heaters are delivered to site
When light fixtures and electrical trim is delivered to site (thermostats and timers)
When electrical trim is compete and all fans have power

Washington State Requirement:
Water heaters cannot be installed at a temperature of more than 120° F.

For more information, call Peter Held, BUILT SMART Program Coordinator, at 206.684.3605.

Interested in BUILT SMART building? Contact Peter Held, by e-mail at peter.held@seattle.gov or by phone at 206.684.3605. For affordable housing projects, please contact Don Pendleton at don.pendleton@seattle.gov or by phone at 206.684.4283.
BUILT SMART Home \| BUILT SMART Users Manual

The Seattle City Light Web Team:

Seattle City Light -- 700 5th Avenue, Suite 3200, Seattle, WA 98104-5031 -- 206.684.3000

Mailing address: 700 5th Avenue, Suite 3200, P.O. Box 34023 Seattle, WA 98124-4023

Seattle.gov: Services | Departments | Staff Directory | Mayor | City Council

Questions/Complaints | Privacy & Security Policy